- This Gizmobaba power Saver Gadget is easy to use and maintenance free. Just plug the Gadget into the wall socket closest to the meter, one signal phase household requires one Power Saver. So if you have a 3 Phase supply, you will need 3 Power Savers.
- It uses state of the art electrical technology to actively monitor and improve the power factor of electrical appliances, and is suitable for homes or offices.
- The technology optimizes the voltage and current demands to reduce the active power demands ,reduce electricity bills by up to 35%.
- It reduces electrical overheating and improved saving consistency, so that the life of your appliances is prolonged.
- Rated Voltage: 110 V- 250 V 50 Hz / 60 Hz (suitable all over the world).
- Working temperature: -15 C to +60 C.
Use one Power Saver for every 18,000 watts (18KW). Cheaper Power Savers have no warranty and are rated with much less power. They will stop working when your power requirement goes over 5 Kilowatts. Such low rated products are suitable for very small homes. If you have a refrigerator, geyser, air-conditioner etc in your house, don't compromise. This is the REAL 18KW Power Saver model available.
How does it work?
The Gizmobaba Power Saver uses a state of the art electrical technology to actively monitor and improve the power factor of your household / office appliances.
In additional, the intelligent technology optimizes the voltage and current demands thus reducing the active power / KwH demands and achieves up to 45% saving on your electricity bill.
It also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies the load with constant voltage during momentary power surges. This in turn results lifespan of the electrical appliances. This is a feature that cheaper power Savers do not have.
For it to work optimally, it should be installed as close as possible to the point of the entry of your electricity supply so as to detect all loads and adjusts the power factor accordingly.
It is known that the electricity that comes to our homes is not stable in nature. There are many fluctuations, raise and falls, and surges/Spikes in this current. This unstable current cannot be used by any of the household appliances. Moreover, the fluctuating current wastes the electric current from the circuit by converting electrical energy into heat energy.
This heat energy not only gets wasted to the atmosphere, but also harms the appliances and wiring circuit.
The Power Saver stores the electricity inside of it using a system of capacitors and they release it in a smoother way to normal without the spikes. The systems also automatically remove carbon from the circuit which also encourages a smoother electrical flow. This means that we will have less power spikes. More of the electricity flowing around circuit can be used to power appliances than before.
Power savers work on straightening this unstable electric current to provide a smooth and constant output. The fluctuation in voltage is unpredictable and cannot be controlled. However, the power savers utilize current fluctuation to provide a usable power by acting like a filter and allowing only smooth current to pass through the circuit. Power savers use capacitors for this purpose. When there is a surge of current in the circuit, the capacitor of the power saver stores the excess current and releases it when there is a sudden drop. Thus only smooth output current comes out of the device.
Moreover, a power saver also removes any type of carbon in the system, which facilitates further smoother flow. The main advantage of power savers is not that they provide a backup system in times of low current, but that it protects the household appliances. It is known that a sudden rise in the power can destroy the electrical appliance. Thus, the power saver not only protects the appliance but also increases its life. Moreover, they also reduce the energy consumption and thus the electricity bills.
The amount of power saved by a power saver depends on the number of appliances on the electrical circuit. The maximum amount of voltage savings will be seen in areas where in the current fluctuation is the highest.
Note that 45% is the maximum power saving, on equipment that is extremely inefficient. Overall, the power saving is expected to be 15-20%.
To see the effect, please use the power saver for a period of atleast 30-45 days for the carbon in circuit to be totally eliminated and to see the benefits. Depending on the amount of heavy appliances in the circuit, you should be able to see a power consumption reduction from your second bill cycle.
CLICK PLAY BUTTON BELOW TO SEE THE THE GIZMOBABA POWER SAVER AT WORK.
Note: The below demo of the Gizmobaba Power Saver is done to show how the Power Saver reduces power consumption of appliances that draw high amount of power.
We used an old inefficient 300W motor in an industrial circuit where the electricity sine wave is not very consistent and power supply fluctuates between 160V to 250V.
We were able to achieve a nearly 40% saving of power under this scenario.